Application Guide for tesa® 60955 Anti-Slip Tape

What You Need:

  • tesa® 60955 Anti-Slip Tape
  • Cleaning solution
  • Soft cloth or brush
  • Scissors or utility knife

Steps:

Clean the Surface:

Ensure the area where you'll apply the tape is clean and free from dust, oil, and debris. Use a cleaning solution and a soft cloth or brush to thoroughly clean the surface.

Measure and Cut the Tape:

Measure the required length of the tape for the area you’re covering. Cut the tape to the desired length using scissors or a utility knife.

Apply the Tape:

Peel off the PET-liner from the tape to expose the adhesive. Carefully position the tape on the surface, starting from one end and gradually pressing it down as you go. Make sure to smooth out any air bubbles or wrinkles.

Conform to Irregular Surfaces:

For irregular surfaces, press the tape firmly around edges and contours to ensure it conforms well and adheres properly.

Ensure Strong Bond:

Press down firmly along the entire length of the tape to make sure the acrylic adhesive bonds strongly to the surface. The mineral particles on the aluminum carrier provide excellent grip and safe footing.

Safety Check:

If you’re using the black-yellow or yellow tape, ensure it’s highly visible for safety and warning purposes. This is especially useful for areas with safety concerns or to complement 5S manufacturing initiatives.

You’re all set for a safer, slip-free environment! 🦺